NICOR DLE43120SRD Round 4 in. Selectable Edge Lit LED Downlight

The NICOR DLE4 Edge Lit LED Downlight is a super thin fixture, with a depth of only one inch, which allows it to be installed in tight spaces in both commercial and residential environments. Making installation even easier is the DLE4 includes a remote driver box and simple spring loaded retention tabs, eliminating the need for a housing or a j-box. The DLE Select Series uses a micro-switch on the driver housing to easy switch between CCT's from 3000K to 5000K, giving you the perfect light for your space. The NICOR DLE43120SRD is also wet-location rated, allowing for use in bathrooms.

For a Formal Estimate Call: 888-560-0759 or E-Mail: [email protected]

Our LED Products Come with an Outstanding 5-Year Warranty!

DLE43120SRD (3000K - 5000K Adjustable) Available in Black, Nickel, and Oil-Rubbed Bronze. Select below:

Construction
• Cast aluminum housing routes heat away from electrical components
• Edge-Lit technology allows for extremely thin fixture depth
• Adjustable, spring loaded retention tabs ensure secure fixture retention
• Low profile micro-switch on driver housing for CCT selection
• Certified for direct contact with insulation
• Includes gasket to meet AirTight requirements

Optical System
• Precision engineered optical stack creates uniform light distribution that maximizes lumen output

Electrical
• Off-board driver minimizes installation height and maximizes fixture life through improved heat management
• Input voltage of 120VAC
• Dimmable to less than 5% with compatible leading edge (TRIAC) and trailing edge (ELV) dimmers
• LM-79 testing performed in accordance with IESNA standards

Finish
• White powder coat finish standard
• Accessory color trims available in Black, Nickel and Oil-Rubbed Bronze

LED
• Dual emitter array enables CCT selection
• CCT Selectable at 3000K, 4000K, or 5000K
• Binned within 4-step MacAdams with duv <±0.003
• TM-21 Reported L70(9K) hours >36,000
• Utilizes high performing LEDs with 90+ CRI and an R9 > 50

Mounting and Installation
• Spring loaded retention tabs allow for easy installation into ceilings up to 3/4” thick with no need for a recessed housing
• Off-board driver/junction box includes two 1/2” KOs, two 3/8” KOs and four-port poke-in connectors
• Included paper cutting template
• Accessory metal rough in template available
• Accessory extension power cables (2’ & 10’) available
• Suitable for wet locations
• Operating temperature of 0° to 120°F (-18°C to 49°C)
• For installations where power surge may be possible, NICOR recommends installing additional surge protection at the electrical distribution panel

Warranty
• 5-year limited system warranty standard
• Warranty does not cover product failure due to an overvoltage event (power surge)

Downloads:

NICOR DLE4 v3 Spec Sheet

NICOR DLE Select Installation Instructions