NICOR DLE63120SRD Round 6 in. Oil-Rubbed Bronze Selectable Edge Lit LED Downlight

The NICOR DLE6 LED Downlight in Oil-Rubbed uses the latest in LED technology to give you the ability to change your color temperature at the push of a button. Using the micro-switch on the driver housing you can adjust your CCT between 3000K, 4000K, or 5000K. This thin downlight was designed to make installation as simple as possible. There is no need for a housing or j-box, so you can install this wet-location certified downlight in narrow areas and wet areas, such as bathrooms. The plenum-rated cable connector links the downlight to the remote driver box and pops into place with included spring loaded retention tabs. Designed for use in both residential and commercial environments.

For a Formal Estimate Call: 888-560-0759 or E-Mail: [email protected]

Our LED Products Come with an Outstanding 5-Year Warranty!

(3000K - 5000K Adjustable)

Construction
• Cast aluminum housing routes heat away from electrical components
• Edge-Lit technology allows for extremely thin fixture depth
• Adjustable, spring loaded retention tabs ensure secure fixture retention
• Low profile micro-switch on driver housing for CCT selection
• Certified for direct contact with insulation
• Includes gasket to meet AirTight requirements

Optical System
• Precision engineered optical stack creates uniform light distribution that maximizes lumen output

Electrical
• Off-board driver minimizes installation height and maximizes fixture life through improved heat management
• Input voltage of 120VAC
• Dimmable to less than 5% with compatible leading edge (TRIAC) and trailing edge (ELV) dimmers
• LM-79 testing performed in accordance with IESNA standards

Finish
• White powder coat finish standard
• Accessory color trims available in Black, Nickel and Oil-Rubbed Bronze

LED
• Dual emitter array enables CCT selection
• CCT Selectable at 3000K, 4000K, or 5000K
• Binned within 4-step MacAdams with duv <±0.003
• TM-21 Reported L70(9K) hours >36,000
• Utilizes high performing LEDs with 90+ CRI and an R9 > 50

Mounting and Installation
• Spring loaded retention tabs allow for easy installation into ceilings up to 3/4” thick with no need for a recessed housing
• Off-board driver/junction box includes two 1/2” KOs, two 3/8” KOs and four-port poke-in connectors
• Included paper cutting template
• Accessory metal rough in template available
• Accessory extension power cables (2’ & 10’) available
• Suitable for wet locations
• Operating temperature of 0° to 120°F (-18°C to 49°C)
• For installations where power surge may be possible, NICOR recommends installing additional surge protection at the electrical distribution panel

Warranty
• 5-year limited system warranty standard
• Warranty does not cover product failure due to an overvoltage event (power surge)

Downloads:

NICOR DLE6 v3 Spec Sheet

NICOR DLE Select Installation Instructions